Release 2.8.1.2
Posted: Fri Feb 06, 2015 2:18 am
A new version of TheBetEngine has just been released. Updating is recommended.
This update has been uploaded to the auto-update servers, so you should be prompted to upgrade.
If you are still running version 2.8.0.6 or below, then you will need to update manually.
If you need to update manually, you should follow these simple instructions:
1. Close down the existing copy of TheBetEngine (if it is running).
2. Wait 1 minute (to allow all files to be saved) then reboot your machine to ensure that no errant processes are still running.
3. Download the new release from http://www.thebetengine.co.uk/downloads ... .8.1.2.exe
4. Double-click on the newly downloaded file to start the installation (you can safely install this version on top of the existing version)
Additions
None
Fixes
1. Fixed a problem where some AUS race courses beginning with the letter T or later were not being loaded correctly.
Changes
None
Note - if you experience any problems with TBE after installing the new version, please do a manual installation (see instructions above) to see if that rectifies the issue.
This update has been uploaded to the auto-update servers, so you should be prompted to upgrade.
If you are still running version 2.8.0.6 or below, then you will need to update manually.
If you need to update manually, you should follow these simple instructions:
1. Close down the existing copy of TheBetEngine (if it is running).
2. Wait 1 minute (to allow all files to be saved) then reboot your machine to ensure that no errant processes are still running.
3. Download the new release from http://www.thebetengine.co.uk/downloads ... .8.1.2.exe
4. Double-click on the newly downloaded file to start the installation (you can safely install this version on top of the existing version)
Additions
None
Fixes
1. Fixed a problem where some AUS race courses beginning with the letter T or later were not being loaded correctly.
Changes
None
Note - if you experience any problems with TBE after installing the new version, please do a manual installation (see instructions above) to see if that rectifies the issue.