Place a manual back bet on a horse for a specified stake if the odds are within a defined range

[TheBetEngine]

THIS IS A SAMPLE SCENARIO AND IS NOT INTENDED TO BE USED AS A BONA-FIDE SYSTEM

Please refer to viewtopic.php?f=31&t=465 for general advice on setting up a new system in TheBetEngine. This example concentrates on specifying the low-level details and does not touch on the high-level details/staking.

SCENARIO: Place a manual back bet on a horse for a specified stake if the odds are within a defined range

General Set-up
1. CLICK ON RESET ALL (to reset all parameters to their default values)
2. Click on the Settings menu, and ensure that Enable Overrides and Enable Advanced Overrides are ticked, then click on Save.
3. On the Ranking tab, set the Selection Type to Manual (this will activate the runners grid)
4. On the Criteria tab, set the required bet time

Making selections
1. Select the desired race on the race grid - the runners for that race will now appear in the runners grid.
2. On the runners grid, select the desired horse by ticking the left hand checkbox (to the left of the horse's name)
3. On the runners grid, scroll to the right to find the column labelled Stake and enter the required stake.
4. On the runners grid, scroll to the right to find the columns labelled MinO and MaxO and enter the required minimum and maximum odds.

Bets will only be placed when the betting tab is set to ACTIVE.

A bet for the specified stake will be placed on the specified horse at the specified bet time, providing the odds on the market fall within the specified odds range.

This can be operated in either TEST or LIVE modes.