Place a lay bet on the 1st horse to reach certain odds inplay
Posted: Fri Oct 30, 2015 4:54 pm
THIS IS A SAMPLE SCENARIO AND IS NOT INTENDED TO BE USED AS A BONA-FIDE SYSTEM
Please refer to http://www.thebetengine.co.uk/forum/vie ... f=31&t=465 for general advice on setting up a new system in TheBetEngine. This example concentrates on specifying the low-level details and does not touch on the high-level details/staking.
SCENARIO: Place a lay bet on the 1st horse to reach certain odds in-play
1. CLICK ON RESET ALL (to reset all parameters to their default values)
2. Set the Bet Type to LAY (right-hand side of the betting tab)
3. On the Criteria tab, set the Max Odds to the desired trigger odds.
4. On the Criteria tab, tick Enable InPlay
5. On the Bet tab, set Stop After to 1 (this prevents any further bets being placed after the first horse has reached the target odds)
ALTERNATIVE SCENARIO: Place a lay bet on the 1st horse to reach certain odds in-play provided the BSP odds of the fav are within a defined range
1. CLICK ON RESET ALL (to reset all parameters to their default values)
2. Set the Bet Type to LAY (right-hand side of the betting tab)
3. On the Criteria tab, set the Max Odds to the desired trigger odds.
4. On the Criteria tab, tick Enable InPlay
5. On the Bet tab, set Stop After to 1 (this prevents any further bets being placed after the first horse has reached the target odds)
6. On the Custom tab, tick Post-Selection Processing and select BSPRanges from the dropdown. Click on Configure to set the desired BSP range for the pre-race favourite, then click on Save.
Please refer to http://www.thebetengine.co.uk/forum/vie ... f=31&t=465 for general advice on setting up a new system in TheBetEngine. This example concentrates on specifying the low-level details and does not touch on the high-level details/staking.
SCENARIO: Place a lay bet on the 1st horse to reach certain odds in-play
1. CLICK ON RESET ALL (to reset all parameters to their default values)
2. Set the Bet Type to LAY (right-hand side of the betting tab)
3. On the Criteria tab, set the Max Odds to the desired trigger odds.
4. On the Criteria tab, tick Enable InPlay
5. On the Bet tab, set Stop After to 1 (this prevents any further bets being placed after the first horse has reached the target odds)
ALTERNATIVE SCENARIO: Place a lay bet on the 1st horse to reach certain odds in-play provided the BSP odds of the fav are within a defined range
1. CLICK ON RESET ALL (to reset all parameters to their default values)
2. Set the Bet Type to LAY (right-hand side of the betting tab)
3. On the Criteria tab, set the Max Odds to the desired trigger odds.
4. On the Criteria tab, tick Enable InPlay
5. On the Bet tab, set Stop After to 1 (this prevents any further bets being placed after the first horse has reached the target odds)
6. On the Custom tab, tick Post-Selection Processing and select BSPRanges from the dropdown. Click on Configure to set the desired BSP range for the pre-race favourite, then click on Save.